TROUBLE SHOOTING GUIDE
| ITEM | PROBLEM | PROBABLE REASONS | CORRECTIVE ACTIONS |
|---|---|---|---|
| One Piece Closet | Water Not Coming In Bowl Area While Flushing Water Is Continuously Leaking Inside The Bowl Water Quantity Insufficient For Effective Flushing Uneven Flow Of Water From Both Side Of Closet |
Mechanism Inside Tank Could Not Working Properly There Is No Water In Flush Tank Mechanism Inside Tank Could Not Working Properly Ball Cock Height Adjusted At Lower Level Closet Is Not Leveled Properly |
Change The Centre Pump Of Mechanism Increase The Ball Cock Height To The Max Level Change The Centre Pump Of Mechanism Increase The Ball Cock Height To The Max Level Closet Should Be In Proper Level |
| Wallhung Water Closet | Water Not Coming In Bowl Area While Flushing Of Inlet Hole Water Is Continuously Leaking Inside The Bowl Water Quantity Insufficient For Effective Flushing |
Flush Valve May Not Working Properly / Concealed Cistern Is Not Working Properly Flush Pipe Is Not Inserted Up To The End Closet Is Not Leveled Properly Connection Between Closet Outlet And Drainage Pipe Is Not Proper |
Should Change Flush Valve / Concealed Cistern Insert The Flush Pipe Up To The End Of Inlet Closet Should Be In Proper Level Should Be Done By Proper Connection By Experienced Plumber |
| Wash Basins I Table Top | Overflow Chocked And Foul Bed Odor Water Deposit On Tap Platform Area And Inside Bowl Area There Is No Tap Hole In Basin |
Waste Coupling Used May Be Full Threaded Basin Is Not Fixed In Level Or Bracket Is Not In Level Tap Hole Could Be Semi Punched From Back Side |
Waste Coupling Should Be Changed To Slot Cut Coupling Should Be Done By Proper Leveling Tap Hole Should Be Created By Plumber From Semipunched Area |
| Ewc I Pan I Anglo Indian | Water Not Coming In Bowl Area While Flushing | Flush Bend Is Not Inserted Up To The End Of Inlet Hole Closet / Pan May Be Not Leveled |
Insert The Flush Pipe Up To The End Of Inlet ( For Pan Closet: Check Whether Flush Pipe Is Not Covering Flush Hole Which Is In Both Side Of Inlet Wall Should Be Done By Proper Leveling |